Solveeit Logo
Login

Question

Question: What will be the resistivity of a conductor with a current density of \(2.5A{{m}^{-2}}\) if an elect...

What will be the resistivity of a conductor with a current density of 2.5Am−22.5A{{m}^{-2}} if an electric field 5×10−8Vm−15\times {{10}^{-8}}V{{m}^{-1}} is applied to it?
A.1.0×10−8Ωm B.2.0×10−8Ωm C.0.5×10−8Ωm D.12.5×10−8Ωm \begin{aligned} & A.1.0\times {{10}^{-8}}\Omega m \\\ & B.2.0\times {{10}^{-8}}\Omega m \\\ & C.0.5\times {{10}^{-8}}\Omega m \\\ & D.12.5\times {{10}^{-8}}\Omega m \\\ \end{aligned}

Explanation

Solution

The current density is the ratio of the current to the area of the material. The voltage will be equivalent to the product of the current flowing and the resistance of the circuit. The voltage can be found by taking the product of the electric field and the length of the material. Substituting all these in the equation of voltage and rearranging the equation will give the correct answer.

Complete step-by-step solution

from the figure, we can write that the length will be,
l=1l=1
The current density has been mentioned in the question as,
σ=2.5Am−2\sigma =2.5A{{m}^{-2}}
The current density is the ratio of the current to the area of the material. Therefore from this, the current can be found as
i=2.5×A1i=2.5\times {{A}_{1}}
Where A1{{A}_{1}} be the area of the surface.
Now the voltage will be equivalent to the product of the current flowing and the resistance of the circuit. That is we can write that,
V=iRV=iR
And also we know that the voltage can be found by taking the product of the electric field and the length of the material. That is we can write that,
V=ElV=El
Comparing both these equation of voltage can be written as,
iR=EliR=El
Substituting the values in it will give,
El=2.5A1×ρlA1 ⇒E=2.5ρ \begin{aligned} & El=2.5{{A}_{1}}\times \dfrac{\rho l}{{{A}_{1}}} \\\ & \Rightarrow E=2.5\rho \\\ \end{aligned}
The electric field has been mentioned in the question as,
E=5×10−8Vm−1E=5\times {{10}^{-8}}V{{m}^{-1}}
Substituting in the equation and rearranging it will give,
ρ=5×10−82.5=2×10−8Ωm\rho =\dfrac{5\times {{10}^{-8}}}{2.5}=2\times {{10}^{-8}}\Omega m
That is the resistivity of the material has been obtained as 2×10−8Ωm2\times {{10}^{-8}}\Omega m. This has been given as option B.

Note: Electric field can be explained as the electric force per unit charge. The direction of the electric field can be taken to be the direction of the force it will be exerting on the test positive charge. The electric field from a positive charge will be radially outward and radially in towards a negative point charge.