Question
Question: Three capacitors of capacitance \(2\,pF,3\,pF\) and \(4\,pF\) are connected parallel. (a) What is...
Three capacitors of capacitance 2pF,3pF and 4pF are connected parallel.
(a) What is the total capacitance of the combination?
(b) Determine the change on each capacitor if the combination is connected to 100V supply.
Solution
As three of the capacitors are connected parallelly to each other then sum of all the three capacitors gives us the total capacitance of the combination. As the capacitance is connected parallelly then the voltage across each capacitance will remain the same, now putting the voltage capacitance and charge relation we can find out the charge on each capacitance.
Complete step by step answer:
(a) As per the problem there are three capacitors of capacitance 2pF,3pF and 4pFare connected parallel. When capacitors are connected parallel to each other then their total resistance is calculated by adding all the capacitance.Now we can get,
Total capacitance = capacitance one + capacitance two + capacitance three
Mathematically,
C=C1+C2+C3……(1)
Given,
C1=2pF
⇒C2=3pF
⇒C3=4pF
Here pF is the unit of capacitance.
PicoFarad = pF
Hence total capacitance,
Putting the given values in equation (1) we get,
C=2pF+3pF+4pF
On further solving we get,
∴C=9pF
Therefore the total capacitance of the combination is 9pF.
(b) As we know the supply voltage to the capacitance is 100V. Three capacitance is connected parallelly hence voltage will remain same for all the capacitor.We know,
q=VC……(2)
Where, Charge of the capacitor = q, Supply Voltage or voltage across capacitor = V and Capacitance = C.
Using equation (2) in all the three cases:
For capacitor one we get,
q1=VC1
Now putting the given values in the equation we get,
q1=100V×2pF
We know,
1pF=10−12F
Now the change become,
q1=100V×2×10−12F
⇒q1=2×10−10C
Unit is coulomb.
Similarly, for charge two we get,
q2=VC2
Now putting the given values in the equation we get,
q2=100V×3pF
⇒q2=100V×3×10−12F
⇒q2=3×10−10C
For charge three we get,
q3=VC3
Now putting the given values in the equation we get,
q3=100V×4pF
⇒q3=100V×4×10−12F
⇒q3=4×10−10C
Hence, upon keeping the supply voltage to the all three capacitors at 100V, we can observe only change in their charges as 2×10−10C, 3×10−10C and 4×10−10C.
Note: Always remember when capacitors are connected parallelly the the voltage across each capacitor will remain constant. Before calculating change, first change the capacitor and voltage to its SI unit to get the charge in coulomb because coulomb is voltage multiplied by farad.