Solveeit Logo

Question

Question: The elastic limit of steel cable is \(3.0 \times {10^8}N/{m^2}\) and the cross-section area is \(4c{...

The elastic limit of steel cable is 3.0×108N/m23.0 \times {10^8}N/{m^2} and the cross-section area is 4cm24c{m^2}. Find the maximum upward acceleration that can be given to a 900 kg elevator supported by the cable if the stress is not to exceed one-third of the elastic limit. If your answer is x, then mark the value of x5\dfrac{x}{5}.

Explanation

Solution

The elastic limit is defined as the point of stress beyond which the material stops being elastic i.e. does not return to its original shape and size. That is the point where the material starts behaving like plastic. It is up to this point that the material obeys Hooke's law.

Complete step-by-step answer:
Let us understand the stress-strain curve,

There are several critical points on the stress-strain curve which need to be understood. The first point A is called the elastic limit. This means that, up to the point A in the stress-strain curve, the stress-strain relation is linear in nature. This means that, up to this point, the material obeys Hooke’s Law.
Hooke’s Law:
σ=Eε\sigma = E\varepsilon where σ\sigma is the stress, ε\varepsilon is the strain and the value EEis called the Young’s Modulus, which is defined as the measure of stiffness of the solid body, the property which makes the solid return to its original shape and size after deforming it.
Elastic limit, σ=FA\sigma = \dfrac{F}{A} where F = force applied and A=area of cross-section.
Given,
σ=3.0×108Nm2\sigma = 3.0 \times {10^8}N{m^{ - 2}}
Since, they have asked to consider one-third the stress in the problem, σ=3.0×1083=108Nm2\sigma = \dfrac{{3.0 \times {{10}^8}}}{3} = {10^8}N{m^{ - 2}}
A=4cm2A = 4c{m^2}
Substituting in the equation, we can obtain the force –
σ=FA F=σA F=108×4×104 F=4×104N  \sigma = \dfrac{F}{A} \\\ F = \sigma A \\\ F = {10^8} \times 4 \times {10^{ - 4}} \\\ F = 4 \times {10^4}N \\\

The force applied on the elevator due to acceleration, F=W+maF = W + ma
where W=weight of the elevator, m=mass of the elevator
Given, mass m=900kgm = 900kg
Therefore, the upward acceleration, a=FWma = \dfrac{{F - W}}{m}
a=Fmgm Substituting, a=4×104900×9.81900 Solving, a=31171900=34.64ms2  a = \dfrac{{F - mg}}{m} \\\ Substituting, \\\ a = \dfrac{{4 \times {{10}^4} - 900 \times 9.81}}{{900}} \\\ Solving, \\\ a = \dfrac{{31171}}{{900}} = 34.64m{s^{ - 2}} \\\
As per the given question, the acceleration to be taken = a5=34.645=6.928ms2\dfrac{a}{5} = \dfrac{{34.64}}{5} = 6.928m{s^{ - 2}}
Therefore, the upward acceleration, a=6.928ms2a = 6.928m{s^{ - 2}}

Note: Students can often get confused while marking the direction of force for upward or downward acceleration. So, just remember the rule of thumb:
The force due to the acceleration mama should be marked in the opposite direction to that of the acceleration.