Question
Question: In the non-resonant circuit, what will be the nature of the circuit for frequencies higher than the ...
In the non-resonant circuit, what will be the nature of the circuit for frequencies higher than the resonant frequency?
A) Resistive
B) Capacitive
C) Inductive
D) None of these.
Solution
There are various conditions for the circuit to be resistive, capacitive and inductive. In XL−XCwhich is inductive give ωL−ωC1 here ω is the frequency,XL is the inductive reactance and XC is the capacitive reactance. If ωtends to smaller then ωC1becomes larger and vice versa
Step by step solution:
Step 1:
Resonant frequency is the oscillation of a system at its natural or unforced resonance. Resonance occurs when a system is able to store and easily transfer energy between different storage modes, such as Kinetic energy or Potential energy as you would find with a simple pendulum
The formula for impedance is Z2 =R2 +(XL−XC)2 where, XL is the inductive reactance and XC is the capacitive reactance and R is the resistance.
Then suppose if our circuit becomes XL−XC=0 then our circuit will be resistive.
Similarly, if XL>XC, then circuit will be inductive
And if XC >XL, then it will be called a capacitive circuit.
Which means XCand XLonly depends on frequency then in resonant condition our circuit will be resistive. That means option (1) is wrong
Now, XLcan be written as =ωL and XC=ωC1
So in XL−XCwhich is inductive give ωL−ωC1 here ω is the frequency
If ωtends to smaller then ωC1becomes larger, that means circuit will be of capacitive nature
And when it tends to be larger than the circuit be of inductive nature.
This is what was asked in the question. Inductive will be the nature of the circuit for frequencies higher than the resonant frequency
So option C is correct.
Note: Conditions for resonance: The resonance of a series RLC circuit occurs when the inductive and capacitive reactance is equal in magnitude but cancel each other because they are 180 degrees apart in phase. The sharp minimum in impedance which occurs is useful in tuning applications.