Question

How can we get the required amount of energy by connecting solar panels?

Answer 1

Solar panels are panels that are preferred to be installed where the sunlight reaches maximum because these panels are eligible for turning solar energy into electricity. Several solar cells are aligned on these panels. These cells absorb the heat from sunlight and transfer it to the boilers which heat the water and the steam produced out of it is used to create electricity using the same application as in steam engines.

Complete answer:
Connecting solar panels is an easy and beneficial way of increasing your solar power capabilities.
The trick here when connecting solar panels is to determine a connection method that is going to provide you the most energy-efficient configuration for your specific provisions. Attaching solar panels together can seem like a daunting task when you first start to look at how it should be done, but connecting multiple solar panels together is not that difficult with a little thought. Solar panels should be wired together in either parallel or series combinations. This is a completely essential part of any well designed solar power system.

There are three fundamental and different ways of connecting solar panels together, each designed for a specific purpose.

In series connection
In parallel connection
Together in both series and parallel combinations.
In series
In a series connection, the panels are wired together by connecting the positive terminal to the negative terminal of each panel until you are left with a single positive and negative connection.
Solar panels in series sum the voltages produced by each individual panel, giving the total output voltage of the array as shown. They are of the following types-
Solar Panels in Series of Same Characteristics
Solar Panels in Series of Different Voltages
Solar Panels in Series of Different Currents
Parallel connection
In a parallel connection, panels are wired as all the positive terminals together (positive to positive) and all of the negative terminals together (negative to negative). At last, you are left with a single positive and negative connection to connect to your regulator and batteries.
When you connect solar panels in parallel, the total voltage output continues the same as it would for a single panel, but the output current comes to be the sum of the output of each panel as shown. These are of the following types-
Solar Panels in Parallel of Same Characteristics
Solar Panels in Parallel with Different Voltages and Currents

Note: The term solar panel is referred to colloquially for a photo-voltaic module. A PV module is a convention of photo-voltaic cells mounted in a framework for installation. Photo-voltaic cells utilize sunlight as a source of energy and produce direct current electricity.