Solveeit Logo

Question

Question: Derive the Fourier`s conduction equation for general bodies. ![](https://www.vedantu.com/question-...

Derive the Fourier`s conduction equation for general bodies.

(dqdt=kAdtdx)\left( {\dfrac{{dq}}{{dt}} = - kA\dfrac{{dt}}{{dx}}} \right)

Explanation

Solution

Fourier law of heat conduction is the governing law for conduction equations. It states that the rate of heat transfer is directly proportional to the area normal to the direction of heat flow and temperature gradient i.e., drop in temperature per unit length.

Complete solution:
Let us consider a small elemental area from the above body

Let the width of this elemental part be dxdx
The small change in temperature be dtdt
A temperature gradient will be the change in temperature per unit area or dtdx\dfrac{{dt}}{{dx}}
And let AA be the area perpendicular to the direction of heat flow
Refer to the diagram
Now as per Fourier’s law
dqdtA\dfrac{{dq}}{{dt}} \propto {\rm A}and,
dqdtdtdx\dfrac{{dq}}{{dt}} \propto \dfrac{{dt}}{{dx}}
dqdtAdtdx\therefore \dfrac{{dq}}{{dt}} \propto {\rm A}\dfrac{{dt}}{{dx}}
dqdt\dfrac{{dq}}{{dt}} is the rate of heat transferred?
Here to remove the proportionality a constant of proportionality is inserted which
kk which is known as Thermal conductivity of the material or wall and is expressed in (wmK)\left( {\dfrac{w}{m}K} \right)
dqdt=kAdtdx\therefore \dfrac{{dq}}{{dt}} = - kA\dfrac{{dt}}{{dx}}
Here the negative sign indicates the drop in temperature across the body
Since dtdt is the change in temperature so it will be expressed as
dt=T2T1dt = {T_2} - {T_1}
And as it is evident that T2{T_2} will be lower than T1{T_1} so we`ll get a negative value of dtdt so we use a negative sign before kk to nullify this and make heat transfer rate positive

The heat flow rate dqdt\dfrac{{dq}}{{dt}} across a body will be dqdt=kAdtdx\dfrac{{dq}}{{dt}} = - kA\dfrac{{dt}}{{dx}}.

Note: The heat always flows from higher temperature to lower temperature that’s why T1{T_1} will always be greater than T2{T_2}.
The area perpendicular to heat flow rate will always be considered because it is the only area which will cause resistance to the flow of heat and thus will reduce its temperature.
The thermal conductivity (k)\left( k \right)is the internal property of the body; it is the measure of how easily heat can be conducted through a body. It is generally higher for metals and lowers for non-metals .