Solveeit Logo

Question

Question: A series LCR circuit with \(R=20\Omega \) , \(L=1.5H\) and \(C=35\mu F\) is connected to a variable-...

A series LCR circuit with R=20ΩR=20\Omega , L=1.5HL=1.5H and C=35μFC=35\mu F is connected to a variable-frequency 200V200V ac supply. When the frequency of the supply is equal to the natural frequency of the circuit, then what is the average power transferred to the circuit in a complete cycle?

Explanation

Solution

Here the frequency of supply gets equal to the natural frequency of the circuit. This is known as the resonance condition. For a LCR circuit, the impedance of the circuit is given by the equation,
Z=R2+(ωL1ωC)Z=\sqrt{{{R}^{2}}+\left( \omega L-\dfrac{1}{\omega C} \right)}

Complete step by step answer:
First of all let us discuss the term resonance in the LCR circuit. The resonance of a series LCR circuit happens when the inductive and capacitive reactance are similar in magnitude but cancel out each other since their phase is differing by 180180{}^\circ . The sharp minimum in impedance which happens is helpful in tuning applications. Electrical resonance is known to happen in a series LCR circuit when the circuit permits the maximum current for a particular frequency of the source of alternating supply for which capacitive reactance becomes similar to the inductive reactance. The impedance of LCR circuit is found to be minimum and hence current is given as maximum 0.7070.707
Now the impedance of the LCR series circuit can be given as,
Z=R2+(ωL1ωC)Z=\sqrt{{{R}^{2}}+\left( \omega L-\dfrac{1}{\omega C} \right)}
In which RR is the resistance, LL is the inductance and CC is the capacitance of the circuit.
Here
ωL=1ωC\omega L=\dfrac{1}{\omega C}
Therefore the impedance will become,
Z=RZ=R
And also we know that, current is given by the equation,
I=VRI=\dfrac{V}{R}
Substituting the values in it will give,
I=20020=10AI=\dfrac{200}{20}=10A
Therefore the power of the LCR series circuit given will be,
P=V×I=200×10=2000WP=V\times I=200\times 10=2000W
Therefore the correct answer for the question has been obtained.

Note:
An important characteristic of a resonant circuit is termed as bandwidth. Bandwidth is described as the size of frequency range that is allowed or rejected by the tuned circuit. That is, the total number of cycles below and above the resonant frequency for which the current is similar to or greater than 0.7070.707 of its resonant value.